Error code troubleshooting

Error code-HEZ

Model1：. Controller mode:. 1. Press the ⬇️ until the desk reaches its lowest position. 2. Release the ⬇️, and press it again for at least 6 seconds until hearing the "dee" sound with the desk's rebound. *If solution 1 is not implemented, then solutio

Error code-JCH

Note: When the controller is displaying "RSt", press and hold both the ⬇️ and the ⬆️ simultaneously for 10 seconds until the desk reaches its lowest height and displays its current height. *If solution 1 is not implemented, then solution 2 is impleme

Error code-JZH

Factory-JZH. 1、Long press the ⬇️ for 5 seconds and the screen will show “ RES ”. 2、Keep pressing the ⬇️ until the desk reaches its lowest height with a rebound. 3、Release the buttons to complete the reset. *If solution 1 is not implemented, then sol

Error Code-MDW

Controller mode:. 1. D1 mode. Note: When the controller is displaying "RSt", press and hold both the ⬇️ and the ⬆️ simultaneously for 10 seconds until the desk reaches its lowest height and displays its current height. *If solution 1 is not implement

Error Code-AGE

Error Code-AGE. Factory-AGE. Controller mode:. Until the desktop descends to the lowest position and stops after a rebound. 2. Release both buttons to finish the initialization setup. Error code and troubleshooting:. *If solution 1 is not implemented

Error Code-DWK

Factory-DWK. Controller:. Pressing on ⬇️ button NON-Releasing for at least 6-10 seconds, UNTIL the display shifts to “E-1/rES”. Followed by release, press again on the ⬇️ button until the read of the lowest height is shown on the display. *Implement