Solutions - Cloumns Out of SyncUpdated 3 years ago
Columns Out of Sync
1. Definition
When lowered to its lowest point, the two legs are not at the same height, usually confirmed by the height of the exposed part of the inner tube, which does not disappear completely under normal circumstances.
Other common descriptions include failure to lower to the lowest point, inconsistent leg heights, out-of-sync lifts, tilting from side to side, etc.
2. Treatment options
Type | Solutions | Remarks |
Single motor | Manual adjustment of the non-motor legs to the same height before assembly. | To be carried out with the drive rod removed |
Twin/three motors | 1. Mechanical reset. 2. Replace abnormal table legs if ineffective. | The mechanical reset method refer to individual factory fault code solutions |
Non-motor leg height adjustment method for single motor products.
- 1. Uninstall the sync rod from the desk
- 2. Get it inserted into the leg with no motor first
- 3. Rotate the rod until the other end of it is aligned with the right side.
3. Common Gorgias templates
【升降故障】JCH DWK AGE 单电机 高低 Tilted Desk 调试 桌腿无法降至最低位 调节非电机侧桌腿高度